蝴蝶翼面形状对绕流结构的影响

蝴蝶的扑翼飞行因其相对翼展较大、扑翼频率低等特点引起广泛关注,尤其是具有越洋迁徙特性的蝴蝶更是备受瞩目。本文以天堂鸟翼凤蝶和黑脉金斑蝶这两种长距离迁徙蝴蝶作为研究原型,利用氢气泡流动显示技术研究这两种不同外形的蝴蝶翼面绕流结构随迎角的变化。在相同的实验条件下,两种模型翼面绕流均出现前缘涡、翼尖涡等流动结构,且绕流结构随迎角的变化趋势基本相同。但由于翼面外形的不同,两种模型在前缘涡的形态、强度及后翼面翼尖绕流结构等方面表现出一定的差异。     

高阶面元法计算多段翼型之位流

本文给出了一种求解多段翼型位流的高阶面元法。面元和奇点的分布分别采用了二阶和三阶的形式。由于高阶面元法较为精确地反映了绕流体的几何形状和奇点表面分布,本文给出了比低阶面元法更为精确的解,并且消除了低阶面元法计算中经常出现的翼型后缘处解的波动。     

Dynamic characteristics analysis of deployable space structures considering joint clearance

The clearance in joints influences the dynamic stability and the performance of deployable space structures (DSS). A virtual experimental modal analysis (VEMA) method is proposed to deal with the effects of joint clearance and link flexibility on the dynamic characteristics of the DSS in this paper. The focus is on the finite element modeling of the clearance joint, VEMA and the modal parameters identification of the DSS. The finite element models (FEM) of the clearance joint and the deployable structure are established in ANSYS. The transient dynamic analysis is conducted to provide the time history data of excitation and response for the VEMA. The fast Fourier transform (FFT) technique is used to transform the data from time domain to frequency domain. The frequency response function is calculated to identify the modal parameters of the deployable structure. Experimental verification is provided to indicate the VEMA method is both a cost and time efficient approach to obtain the dynamic characteristics of the DSS. Finally, we analyze the effects of clearance size and gravity on the dynamic characteristics of the DSS. The analysis results indicate that the joint clearance and gravity strongly influence the dynamic characteristics of the DSS.     

基于局部Neymark分解的混沌信号与噪声的分离方法

从动力系统和几何的观点出发，提出了基于局部Ｎｅｙｍａｒｋ分解的混沌信号与噪声的分离方法。该方法在一个局部的轨道空间内进行Ｎｅｙｍａｒｋ分解，重构时消除由噪声引起的在某些方向上的错误分量，接着进行反嵌入，使得这一由于噪声影响而发生畸变的局部轨道得以纠正，达到混沌信号与噪声分离（以下简称混沌滤波）的目的，并对其中的反嵌入问题作了较为深入的讨论，仿真实验表明了本方法的有效性。     

基于精确伪距率观测模型的GPS/SINS组合导航系统研究

从泰勒公式及函数矩阵的基本定义出发，推导了考虑位置误差相关项时，GPS/SINS组合导航系统精确的伪距率观测数学模型。仿真结果表明，使用精确伪距率观测模型的伪距、伪距率交替组合导航系统，其位置误差能更好地跟踪GPS系统位置几何误差系数，能更真实地反映载体的短期位置误差，更适用于对航天器或大气飞行器短期位置导航精度要求较高的场合（如把航天飞机或大气飞行器作为高分辨率合成孔径雷达等遥感器的载体）。     

Al/Mg阻抗梯度材料超高速撞击机理数值仿真研究

文章采用数值仿真方法研究了Al/Mg阻抗梯度材料在超高速撞击下的响应过程,分析了冲击波在阻抗梯度材料中的传播规律,计算了撞击过程中的能量耗散情况,并与弹丸撞击铝合金靶的结果进行了比较。研究结果表明,相对于铝合金材料,Al/Mg阻抗梯度材料：1）延长了冲击波的传播时间,使峰值压力脉冲的比冲量提升了30%～50%;2）提高了塑性功和内能转化量,使不可逆功增加了10%。由此证明阻抗梯度材料的防护性能优于铝合金。     

自适应天线抗干扰性能研究

分析了适用于雷达抗干扰的一些自适应天线波束形成算法,将子空间正交投影算法应用于雷达抗干扰,针对子空间分解过程中特征向量不能完全正交的问题,采用约束化子空间分解算法,来保证子空间特征向量的正交性.最后通过仿真证明:子空间跟踪算法相对于传统的一些自适应算法具有更强的抗干扰性能.     

Attitude control system design and on-orbit performance analysis of nano-satellite––‘‘Tian Tuo 1’’

‘‘Tian Tuo 1'(TT-1) nano-satellite is the first single-board nano-satellite that was successfully launched in China. The main objective of TT-1 is technology demonstration and scientific measurements. The satellite carries out the significant exploration of single-board architecture feasibility validation, and it is tailored to the low-cost philosophy by adopting numerous commercialoff-the-shelf(COTS) components. The satellite is featured with three-axis stabilization control capability. A pitch bias momentum wheel and three magnetic coils are adopted as control actuators.The sun sensors, magnetometers and a three-axis gyro are employed as the measurement sensors.The quaternion estimator(QUEST) and unscented Kalman filter(UKF) method are adopted for the nano-satellite attitude determination. On-orbit data received by ground station is conducted to analysis the performance of attitude determination and control system(ADCS). The results show that the design of ADCS for TT-1 is suitable, robust and feasible.     

基于GA-ELM的飞行载荷参数识别

针对用复杂飞行数据识别飞行载荷时的精度低、速度慢等问题,提出一种结合遗传算法(GA)和极限学习机(ELM)的GA-ELM模型。该模型使用ELM神经网络作为计算核心,用遗传算法产生ELM网络输入层到隐含层的权值矩阵和隐含层偏移量;用GA-ELM模型对飞行数据进行识别,并与BP神经网络和原始ELM神经网络的识别结果进行对比。结果表明:GA-ELM模型是一种有效且高精度的飞行载荷参数识别方法。